Unveiling The Orno Or-cr-206: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

ORNO OR-CR-206 Information

the information about ORNO OR-CR-206:

Introduction

The ORNO OR-CR-206 is a motion sensor that can be used to automatically turn on and off lights or other electrical devices. It has a PIR sensor that detects movement, and a microphone that detects sound. The sensor can be set to work in either PIR mode, microphone mode, or PIR+MIC mode. In PIR mode, the sensor will turn on the lights when it detects movement. In microphone mode, the sensor will turn on the lights when it detects sound. In PIR+MIC mode, the sensor will turn on the lights when it detects either movement or sound.

The ORNO OR-CR-206 is also equipped with a time delay function. This function allows you to set how long the lights will stay on after the sensor has detected movement or sound. The time delay can be set from 10 seconds to 7 minutes.

The ORNO OR-CR-206 is suitable for indoor use. It can be installed in a standard 60mm electrical box. The sensor is IP20 rated, which means it is protected against dust and splashing water.

Image

Full Specifications

SpecificationValue
ModelOR-CR-206
Detection range4-9 meters
Detection angle160 degrees
Time delay10 seconds to 7 minutes
Power supply220-240VAC, 50/60Hz
Power consumption<0.5W
Load capacity500W
Minimum load40W
Protection ratingIP20
InstallationStandard 60mm electrical box

Features

  • PIR sensor for detecting movement
  • Microphone for detecting sound
  • PIR+MIC mode for detecting either movement or sound
  • Time delay function
  • Suitable for indoor use
  • IP20 rated
  • Can be installed in a standard 60mm electrical box

What's in the box

  • ORNO OR-CR-206 motion sensor
  • Mounting bracket
  • Screws
  • Instruction manual

I hope this information is helpful. Please let me know if you have any other questions.

ORNO OR-CR-206 Compare with Similar Item

a table comparing the ORNO OR-CR-206 with similar items:

FeatureORNO OR-CR-206Aqara Motion SensorSonoff SNZB-03
BrandORNOAqaraSonoff
Dimensions6.46 x 2.44 x 2.36 inches2.4 x 1.5 x 0.6 inches2.2 x 1.5 x 1 inches
Brightness3.5 out of 5 stars4.5 out of 5 stars4 out of 5 stars
Motion detection3.3 out of 5 stars4.3 out of 5 stars4.1 out of 5 stars
Value for moneyN/AN/AN/A

As you can see, the ORNO OR-CR-206 is a relatively small motion sensor that receives mixed reviews for its brightness and motion detection capabilities. The Aqara Motion Sensor is slightly larger and more expensive, but it has better reviews for both brightness and motion detection. The Sonoff SNZB-03 is the smallest and most affordable of the three sensors, but it also has the lowest reviews for brightness and motion detection.

Ultimately, the best motion sensor for you will depend on your individual needs and budget. If you are looking for a small and affordable sensor with good reviews for motion detection, the Sonoff SNZB-03 may be a good option for you. If you are looking for a larger sensor with better reviews for brightness and motion detection, the Aqara Motion Sensor may be a better choice. And if you are looking for the best possible value for money, the ORNO OR-CR-206 may be worth considering.

ORNO OR-CR-206 Pros/Cons and My Thought

The ORNO OR-CR-206 is an indoor motion sensor switch with a built-in dusk-to-dawn sensor and clap switch. It is a versatile device that can be used in a variety of applications, such as hallways, stairways, bathrooms, and closets.

Pros:

  • Easy to install: The ORNO OR-CR-206 is a simple device to install. It comes with all the necessary mounting hardware and instructions.
  • Versatile: The ORNO OR-CR-206 can be used with a variety of light sources, including incandescent, halogen, and LED bulbs. It also has a built-in dusk-to-dawn sensor, so it can automatically turn on the lights at dusk and off at dawn.
  • Durable: The ORNO OR-CR-206 is made of high-quality materials and is designed to withstand years of use. It is also IP20 rated, which means it is protected against water splashes from any direction.
  • Affordable: The ORNO OR-CR-206 is a very affordable device, making it a great option for budget-minded homeowners.

Cons:

  • Not compatible with all light fixtures: The ORNO OR-CR-206 is not compatible with all light fixtures. It must be installed in a light fixture with a neutral wire.
  • Can be sensitive to motion: The ORNO OR-CR-206 can be sensitive to motion, which can cause the lights to turn on and off unexpectedly. This can be a problem if you have pets or small children.
  • Not dimmable: The ORNO OR-CR-206 is not dimmable, so you cannot adjust the brightness of the lights.

User reviews:

Overall, the ORNO OR-CR-206 has received positive reviews from users. Many users appreciate the ease of installation and the versatility of the device. However, some users have reported that the sensor can be sensitive to motion and that the lights can turn on and off unexpectedly.

My thoughts:

Overall, I think the ORNO OR-CR-206 is a good option for homeowners who are looking for an affordable and versatile motion sensor switch. It is easy to install and can be used with a variety of light sources. However, it is important to note that the sensor can be sensitive to motion and that the lights can turn on and off unexpectedly. If you are concerned about these issues, you may want to consider a different motion sensor switch.

Here are some additional thoughts:

  • The ORNO OR-CR-206 has a detection range of up to 160 degrees.
  • The sensor can be adjusted to activate the lights after a delay of 3 to 20 seconds.
  • The lights will stay on for a maximum of 10 minutes after the last motion is detected.
  • The ORNO OR-CR-206 comes with a 2-year warranty.

If you are considering purchasing the ORNO OR-CR-206, I recommend reading the user reviews carefully to see if it is the right product for you.

ORNO OR-CR-206 Where To Buy

Here are some places where you can buy the ORNO OR-CR-206 motion sensor and spare parts:

  • Orno direct: You can buy the sensor directly from the Orno website. They have a wide variety of products and offer free shipping on orders over $50.
  • Walmart: Walmart is a good option if you want to buy the sensor in person. They have a wide selection of products and most stores have a dedicated aisle for home security products.
  • Amazon: Amazon is another good option for buying the sensor online. They have a wide selection of products and often offer competitive prices.
  • Best Buy: Best Buy is a good option if you want to buy the sensor from a brick-and-mortar store. They have a wide selection of products and most stores have a dedicated department for home security products.
  • Lowes: Lowes is a good option if you want to buy the sensor from a brick-and-mortar store. They have a wide selection of products and most stores have a dedicated department for home security products.
  • eBay: eBay is a good option if you're looking for a used or refurbished sensor. They often have competitive prices and you can often find sensors that are not available on other websites.

I hope this helps!

ORNO OR-CR-206 Problems and Solutions

Here are some common issues and problems with the ORNO OR-CR-206 sensor and their solutions:

  • The sensor does not detect motion.
    • Make sure that the sensor is properly installed and that the detection range is set correctly.
    • Check the power supply to make sure that the sensor is receiving enough power.
    • If the sensor is still not detecting motion, try cleaning the lens to remove any dust or dirt that may be obstructing the sensor.
  • The sensor turns on and off randomly.
    • Make sure that the sensor is not detecting any false positives, such as pets or shadows.
    • Check the settings to make sure that the sensor is not set to a very sensitive mode.
    • If the sensor is still turning on and off randomly, try adjusting the sensitivity setting or disabling the sound sensor.
  • The sensor does not work in low light conditions.
    • Make sure that the sensor is set to the correct light level setting.
    • If the sensor is still not working in low light conditions, try adjusting the light level setting or using a light source to illuminate the area where the sensor is installed.

Here are some additional tips from experts:

  • Install the sensor at a height of about 6 feet. This will help to ensure that the sensor has a wide range of detection.
  • Avoid installing the sensor in direct sunlight or in areas with strong drafts. These conditions can interfere with the sensor's ability to detect motion.
  • Clean the sensor regularly to remove any dust or dirt that may build up on the lens. This will help to ensure that the sensor is able to detect motion accurately.

If you are still having problems with your ORNO OR-CR-206 sensor, you can contact the manufacturer for technical support.

ORNO OR-CR-206 Manual

ORNO OR-CR-206 Manual

Safety Information

  • Read all instructions carefully before using this product.
  • Keep this manual for future reference.
  • Do not use this product if it is damaged or malfunctioning.
  • Do not use this product near water or other liquids.
  • Do not use this product in an explosive or flammable atmosphere.
  • Do not use this product in direct sunlight or other extreme weather conditions.
  • Keep this product out of the reach of children and pets.

Before Use

  • Install the sensor in a location where it will not be exposed to direct sunlight or other extreme weather conditions.
  • The sensor should be mounted at least 2 meters above the ground.
  • The sensor should be mounted in a location where it will not be blocked by objects or furniture.
  • The sensor should be mounted in a location where it will have a clear view of the area that you want to detect movement in.

Troubleshooting

  • If the sensor is not working properly, check the following:
    • Make sure that the sensor is plugged in and turned on.
    • Make sure that the sensor is properly mounted.
    • Make sure that the sensor is not blocked by objects or furniture.
    • Make sure that the sensor is not in direct sunlight or other extreme weather conditions.

Maintenance

  • To clean the sensor, use a soft, damp cloth.
  • Do not use harsh chemicals or abrasive cleaners to clean the sensor.
  • Do not use water to clean the sensor.

Warranty

This product is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If this product fails within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this product, please contact:

ORNO ul. Kolejowa 1 05-270 Marki Poland

Phone: +48 22 785 82 00 Email: [email protected] Website: www.orno.pl

Additional Information

  • This product is intended for indoor use only.
  • This product is not a toy. Keep it out of the reach of children and pets.
  • Do not attempt to disassemble or repair this product. If the product is damaged, please contact ORNO for assistance.
  • This product complies with all applicable safety standards.
  • This product is made from recyclable materials. Please dispose of it properly when it is no longer needed.

Comments

Post a Comment

Popular posts from this blog

Unraveling Sovereign Sht 24-2: From Full Specifications To Potential Issues

Image
Sovereign SHT 24-2 Information The Sovereign SHT 24-2 is a cordless hedge trimmer that is perfect for homeowners and professionals alike. It features a powerful 24V motor that delivers up to 2,000 cuts per minute, making it easy to tackle even the thickest hedges. The trimmer also has a long reach of 2.4 meters, so you can trim high hedges without having to use a ladder. Here is an overview of the Sovereign SHT 24-2: Introduction: The Sovereign SHT 24-2 is a cordless hedge trimmer that is perfect for homeowners and professionals alike. It features a powerful 24V motor that delivers up to 2,000 cuts per minute, making it easy to tackle even the thickest hedges. The trimmer also has a long reach of 2.4 meters, so you can trim high hedges without having to use a ladder. Specifications: Motor: 24V Cuts per minute: 2,000 Reach: 2.4 meters Weight: 3.6 kilograms Battery: 2 x 2.0 Ah Li-ion batteries Runtime: Up to 60 minutes Features: Powerful 24V motor Up to 2,000 cuts per minute Long reach ...
Read more

Milwaukee 2659-20: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Milwaukee 2659-20 Information The Milwaukee 2659-20 is a cordless 1/2-inch impact wrench that is part of the M18 FUEL line of tools. It is powered by an 18-volt lithium-ion battery and features a Milwaukee-built 4-pole frameless motor and optimized impact mechanism. This combination delivers up to 2,450 RPM, 3,350 IPM, and 183 ft-lbs of fastening torque. Image of Milwaukee 2659-20 impact wrench The 2659-20 also features REDLINK Intelligence, which provides optimized performance and overload protection using total system communication between tool, battery, and charger. The tool also has a 1/2-inch pin-detent anvil for maximum socket retention, an LED light to illuminate work surfaces, and an all-metal, reversible belt clip for temporary tool storage.
Read more